Series REN23 (Pneumatic)

Complete two-hand no-tie-down control with buttons on ends.
Working pressure range 80-100 PSI, 40 mircon filtered dry non-lubricated air.

Gives a maintained output signal when both buttons are pressed and held. 

 

REN23

• Compact design with 1-3/8″ push button (recessed).
• Light actuation pressure (5 OUNCES).
• 1/4″ push lock fittings included.
• Rounded edges, no sharp edges or corners to injure operator.
• Quick & simple installation, bolt the control down and plug in.

PART #s

• REN23-3W     INTERNAL 3-WAY VALVE
• REN23-4W     INTERNAL 4-WAY VALVE WITH 1.1 CV FACTOR
• REN23-4WL  REN23-4W WITH A SEPARATE CONNECTION FOR LOGIC MODULE. VERY HEAVY LUBRICATION MAY BE INSERTED IN MAIN SUPPLY.

REN23-3W OPTIONS AVAILABLE 

• -C     Cancelable output. An input from a pressure or limit valve will cancel the output.
• -P     .4 second pulsed output.
• -BPL     Bottom connections.  Connections on bottom of the manifold.
• -EPB     (EXTRA PUSH BUTTON) A center mounted N/C 3-way valve with button on top (guarded) has separate output marked EPB.
• -SWV      Switch valve a center mounted toggle diverter valve that diverts the 2-hand output between 2 output ports.

OPTIONS AVAILABLE ON ALL REN 23-3 MODELS 

• -532      5/32 (4MM) Push lock fittings.(1/4″ standard)

ALWAYS USE DRY, NON-LUBRICATED AIR