home |  mission statement |  product index 

             
ERGONOMICALLY DESIGNED PNEUMATIC 
TWO-HAND NO-TIE-DOWN CONTROLS

Pneumatic Models                       Electric Models
 REN23  |  REN28  |  REN300  | REN-CC-1004A |  REN44  | REN45  | REN46 
            
SERIES REN23
GIVES A MAINTAINED OUTPUT SIGNAL WHEN BOTH
BUTTONS ARE PRESSED WITHIN .3 SECONDS AND HELD
Working pressure range 60-100 PSI, 
40 Micron Filtered Dry Nonlubricated air
---
Complete two-hand no-tie-down control with buttons on ends.
COMPACT DESIGN WITH 1-3/8" DIAMETER PUSH BUTTONS (RECESSED).
LIGHT ACTUATION PRESSURE (5 OUNCES).
1/4" PUSH LOCK FITTINGS INCLUDED.
ROUNDED EDGES, NO SHARP EDGES OR CORNERS TO INJURE OPERATOR.
QUICK AND SIMPLE INSTALLATION, BOLT THE CONTROL DOWN AND PLUG IN.

                 
THREE MODELS AVAILABLE PRICE

 REN23-3W      INTERNAL 3-WAY VALVE

REN23-4W 

 INTERNAL 4-WAYVALVE WITH 1.1 CV FACTOR-

REN23-4WL   REN23-4W WITH SEPARATE CONNECTION FOR LOGIC MODULE. VERY HEAVY LUBRICATION MAY BE INSERTED IN MAIN SUPPLY

                
OPTIONS  AVAILABLE ON THE REN23-3W.

ADD

-C

 CANCELABLE OUTPUT.  AN INPUT FROM A PRESSURE OR LIMIT VALVE WILL CANCEL THE OUTPUT

-P

 .4 SECOND PULSED OUTPUT

-BPL

 BOTTOM CONNECTIONS.  CONNECTIONS ON BOTTOM OF MANIFOLD.

-EPB

 (EXTRA PUSH BUTTON) A CENTER MOUNTED N/C 3-WAY VALVE WITH BUTTON ON TOP (GUARDED) HAS A SEPARATE OUTPUT MARKED EPB

-SWV

SWITCH VALVE A CENTER MOUNTED TOGGLE DIVERTER VALVE THAT DIVERTS THE 2-HAND OUTPUT BETWEEN 2 OUTPUT PORTS.

              
OPTIONS AVAILABLE ON ALL REN23 SERIES.  

-532

 5/32 (4MM) PUSH LOCK FITTINGS. (1/4" STANDARD) N/C

-G

 BUTTON GUARDS. GUARDS THAT SURROUND THE BUTTONS AND EXTEND 1/2".   (THE STANDARD EXTENSION IS 1/4")

   

                                       

WARNING: ALL RENCO CONTROLS ARE DESIGNED TO OPERATE PNEUMATIC VALVES AND CYLINDERS.  THEY ARE NOT TO BE USED WITH FLYWHEEL PRESSES, BRAKE PRESSES OR SIMILAR DEVICES.  IT IS THE BUYERS RESPONSIBILITY TO DETERMINE THE USE AND MOUNTING LOCATION OF THIS DEVICE.  THIS EQUIPMENT PERFORMS THE FUNCTION OF A TWO HAND NO TIE DOWN CONTROL ONLY,  ALL OTHER PRESCRIBED SAFETY DEVICES MUST BE USED WITH THE EQUIPMENT.  IT IS THE BUYERS RESPONSIBILITY TO DETERMINE THE PROPER APPLICATION, LOCATION AND USE OF THIS EQUIPMENT

 


MADE
in the
U.S.A.


RENCO, INC.
6719 ALCOA ROAD
BENTON, ARKANSAS 72015 USA
501.776.9915
501.565.0404
FAX  501.315.2395
RencoUSA@gmail.com

Design by ShareNet Marketing, LLC