home |  mission statement |  product index

             
ERGONOMICALLY DESIGNED PNEUMATIC
 TWO-HAND NO-TIE-DOWN CONTROLS
                  
Pneumatic Models                       Electric Models
 REN23  |  REN28  |  REN300  | REN-CC-1004A |  REN44  | REN45  | REN46 
                              
SERIES REN300
COMPLETE TWO-HAND NO-TIE-DOWN.  WORKING PRESSURE RANGE 60-100 PSI, 40 MICRON FILTERED DRY NONLUBRICATED AIR

GIVES A MAINTAINED OUTPUT SIGNAL WHEN BOTH
BUTTONS ARE PRESSED WITHIN .3 SECONDS AND HELD


                          


                                 
 COMPACT DESIGN WITH 1-3/8" DIAMETER PUSH BUTTONS (RECESSED 1/4") ON TOP
LIGHT ACTUATION PRESSURE (5 OUNCES).
MOUNTING SCREWS INCLUDED (10-32).
1/4" PUSH LOCK CONNECTIONS STANDARD, 5/32 (4MM) PUSH LOCK OPTIONAL.
ROUNDED EDGES, NO SHARP EDGES OR CORNERS TO INJURE OPERATOR.
QUICK AND SIMPLE INSTALLATION, BOLT THE CONTROL DOWN AND PLUG YOUR TUBING INTO THE 5/32" 4MM) PUSH LOCK CONNECTIONS.

                
   THE SERIES REN300 FEATURES TOP PALM BUTTONS, THAT USE OUR LIGHT TOUCH VALVES, THIS ALLOWS THE OPERATOR TO KEEP HIS PALMS FACING DOWN.  


REN300



             
OPTIONS AVAILABLE ON THE REN300.

         
-EPB EXTRA PUSHBUTTON, A CENTER MOUNTED N/C 3-WAY VALVE WITH BUTTON (GUARDED) ON TOP, SEPARATE OUTPUT MARKED EPB.


-SWV SWITCH VALVE A CENTER MOUNTED TOGGLE DIVERTER VALVE THAT DIVERTS THE 2-HAND OUTPUT BETWEEN 2 OUTPUT PORTS
-4W 4-WAY VALVE, INTERNAL 1.1 CV 4-WAY VALVE WITH 3 PUSH LOCK FITTINGS - SUPPLY, N/C AND N/O.  THIS SUPERSEDES THE T100 OPTION


-532 4/32: (4MM) PUSH LOCK FITTINGS

N/C

-C CANCELABLE OUTPUT, AN INPUT FROM A PRESSURE OR LIMIT VALVE WILL CANCEL THE OUTPUT


-P .4 SECOND PULSED OUTPUT, THE PALM BUTTONS MUST BE HELD THE FULL TIME


-PA .1-30 SECONDS ADJUSTABLE PULSED OUTPUT, THE PALM BUTTONS MUST BE HELD THE FULL TIME

-G

 BUTTON GUARDS. GUARDS THAT SURROUND THE BUTTONS AND EXTEND 1/2"




ALWAYS USE DRY, NON-LUBRICATED AIR.

WARNING: ALL RENCO CONTROLS ARE DESIGNED TO OPERATE PNEUMATIC VALVES AND CYLINDERS.  THEY ARE NOT TO BE USED WITH FLYWHEEL PRESSES, BRAKE PRESSES OR SIMILAR DEVICES.  IT IS THE BUYERS RESPONSIBILITY TO DETERMINE THE USE AND MOUNTING LOCATION OF THIS DEVICE.  THIS EQUIPMENT PERFORMS THE FUNCTION OF A TWO HAND NO TIE DOWN CONTROL ONLY,  ALL OTHER PRESCRIBED SAFETY DEVICES MUST BE USED WITH THE EQUIPMENT.  IT IS THE BUYERS RESPONSIBILITY TO DETERMINE THE PROPER APPLICATION, LOCATION AND USE OF THIS EQUIPMENT

 


MADE
in the
U.S.A.


RENCO, INC.
6719 ALCOA ROAD
BENTON, ARKANSAS 72015 USA
501.776.9915
501.565.0404
FAX  501.315.2395
RencoUSA@gmail.com

Design by ShareNet Marketing, LLC